Function description
4.7
Latching force
The latching force is the holding force from sensor to actuator when the guard locking is not
activated.
The force typically consists of these components:
}
Force of the permanent magnet in the actuator and
}
optional actively created selectable force.
The latching force can be set (see
}
with a transponder key or
}
with an SDD command.
Latching force stages (when new)
Step
1 (preset)
2
3
Operating Manual PSEN sl2-IL1/2/3-P
1005909-EN-02
Set latching force [
approx. 30 N
(without additional current requirement of the sensor due to
permanent magnet in the actuator)
approx. 110 N
(implemented by current in the locking magnet)
Approx. 200 N
(implemented by current in the locking magnet)
46]):
| 23