Table 15 VLAN: VLAN Status (continued)
LABEL
Elapsed Time
Status
Change Pages
8.5.2 Static VLAN Details
Use this screen to view detailed port settings and status of the VLAN group. See
on page 83
Status screen to display VLAN details.
Figure 40 Static VLAN Details
The following table describes the labels in this screen.
Table 16 Static VLAN Details
LABEL
VLAN Status
VID
Port Number
Elapsed Time
Status
8.5.3 Configure a Static VLAN
Use this screen to configure and view 802.1Q VLAN parameters for the switch. See
8.5 on page 86
Static VLAN in the VLAN Status screen to display the screen as shown next.
Chapter 8 VLAN
DESCRIPTION
This field shows how long it has been since a normal VLAN was registered or a static
VLAN was set up.
This field shows how this VLAN was added to the switch; dynamic - using GVRP,
static - added as a permanent entry or it shows other - added using Multicast VLAN
Registration (MVR).
Click Previous or Next to show the previous/next screen if all status information
cannot be seen in one screen.
for more information on static VLANs. Click on an index number in the VLAN
DESCRIPTION
Click this to go to the VLAN Status screen.
This is the VLAN identification number that was configured in the Static VLAN
screen.
This column displays the ports that are participating in a VLAN. A tagged port is
marked as T, an untagged port is marked as U and ports not participating in a VLAN
are marked as "–".
This field shows how long it has been since a normal VLAN was registered or a static
VLAN was set up.
This field shows how this VLAN was added to the switch; dynamic - using GVRP,
static - added as a permanent entry or it shows other - added using Multicast VLAN
Registration (MVR).
for more information on static VLAN. To configure a static VLAN, click
ES-2108 Series User's Guide
Section 8.1
Section
87