Figure 62 Multicast Setting; Table 42 Multicast Setting - ZyXEL Communications Dimension ES-2108 User Manual

Figure 62 Multicast Setting

The following table describes the labels in this screen.

Table 42 Multicast Setting

LABEL
IGMP Snooping
Active
Host Timeout
Leave Timeout
802.1p Priority
IGMP Filtering
Unknown
Multicast Frame
Port
Chapter 19 Multicast
DESCRIPTION
Use this settings to configure IGMP Snooping.
Select Active to enable IGMP Snooping to forward group multicast traffic only to
ports that are members of that group.
Specify the time (from 1 to 16,711,450) in seconds that elapses before the switch
removes an IGMP group membership entry if it does not receive report messages
from the port.
Enter an IGMP leave timeout value (from 1 to 16,711,450) in seconds. This defines
how many seconds the switch waits for an IGMP report before removing an IGMP
snooping membership entry when an IGMP leave message is received from a
host.
Select a priority level (0-7) to which the switch changes the priority in outgoing
IGMP control packets. Otherwise, select No-Change to not replace the priority.
Select Active to enable IGMP filtering to control which IGMP groups a subscriber
on a port can join.
Specify the action to perform when the switch receives an unknown multicast
frame. Select Drop to discard the frame(s). Select Flooding to send the frame(s)
to all ports.
This field displays the port number.
ES-2108 Series User's Guide
129