ZyXEL Communications Dimension ES-2108 User Manual page 201

Table 74 Command Summary: Configuration Mode (continued)
COMMAND
mac-filter name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
mirror-port
<port-num>
mirror- ingress
filter
egress
lacp
system-priority
trunk <T1|T2>
<T1|T2> lacp
<T1|T2>
interface <port-
list>
interface <port-
list> timeout
<lacp-timeout>
cluster <vlan-id>
name <cluster
name>
Chapter 30 Introducing Commands
DESCRIPTION
Configures a static MAC
address port filtering rule.
Disables a static MAC address
inactive
port filtering rule.
Enables port mirroring.
Sets a monitor port (the port to
which traffic is copied for
analysis).
Specifies whether all incoming
type
traffic is copied from the
<all|dest|src>
mirrored port or whether traffic
going to or coming from a
specific MAC address is
copied.
Specifies the destination MAC
mac <mac-addr>
address or the source MAC
address of the device which
traffic will be copied.
Specifies whether all outgoing
type
traffic is copied from the
<all|des|src>
mirrored port or whether traffic
going to or coming from a
specific MAC address is
copied.
Specifies the destination MAC
mac <mac-addr>
address or the source MAC
address of the device which
traffic will be copied.
Enables Link Aggregation
Control Protocol (LACP).
Sets the priority of an active
<1-65535>
port using LACP.
Activates a trunk group.
Enables LACP for a trunk
group.
Adds a port(s) to the specified
trunk group.
Defines the port number and
LACP timeout period.
Sets the cluster management
VLAN ID.
Configures a name to identify
the cluster manager.
ES-2108 Series User's Guide
PRIVILEG
E
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
201