ZyXEL Communications Dimension ES-2108 User Manual page 204

ES-2108 Series User's Guide
Table 74 Command Summary: Configuration Mode (continued)
COMMAND
timesync <daytime|time|nt
p>
server <ip>
loginPrecede <LocalOnly |
nce LocalRADIUS |
RADIUSOnly>
queue priority <0-7>
level <0-3>
storm-
control
bandwidth-
control
mac-aging- <10-3000>
time
snmp-server get-community
<property>
set-community
<property>
trap-community
<property>
trap-destination
<ip>
[contact <system
contact>]
[location
<system
location>]
logins username <name>
password <pwd>
username <name>
service- icmp
control
snmp
http <socket-
number>
<timeout>
telnet <socket-
number>
ftp <socket-
number>
204
DESCRIPTION
Sets the time server protocol.
Sets the IP address of your
time server.
Select which database the
switch should use (first) to
authenticate a user.
Sets the priority level-to-
physical queue mapping.
Enables broadcast storm
control on the switch.
Enables bandwidth control.
Sets learned MAC aging time. 13
Sets the get community.
Sets the set community.
Sets the trap community.
Sets the IP addresses of up to
four stations to send your
SNMP traps to.
Sets the geographic location
and the name of the person in
charge of this switch.
Configures a default (read-
only) account.
Assigns a privilege level to
privilege <0-
user accounts.
14>
Allows ICMP access for
services such as Ping.
Allows SNMP management.
Allows HTTP access on the
specified service port and
defines the timeout period.
Allows Telnet access on the
specified service port.
Allows FTP access on the
specified service port.
Chapter 30 Introducing Commands
PRIVILEG
E
13
13
14
13
13
13
13
13
13
13
13
14
14
13
13
13
13
13