ZyXEL Communications Dimension ES-2108 User Manual page 207

Table 75 interface port-channel Commands (continued)
COMMAND
pvid <1-4094>
gvrp
frame-type
<all|tagged>
name <port-
name-string>
vlan-trunking
flow-control
bandwidth-
limit
bmstorm-limit
diffserv
qos priority
mirror
Chapter 30 Introducing Commands
DESCRIPTION
The default PVID is VLAN 1 for all ports.
Sets a PVID in the range 1 to 4094 for the
specified interface.
Enables this function to permit VLAN
groups beyond the local switch.
Choose to accept both tagged and
untagged incoming frames or just tagged
incoming frames on a port.
Sets a name for the port(s). Enter a
descriptive name (up to nine printable
ASCII characters).
Enables VLAN Trunking on ports
connected to other switches or routers
(but not ports directly connected to end
users) to allow frames belonging to
unknown VLAN groups to pass through
the switch.
Enables interface flow control. Flow
control regulates transmissions to match
the bandwidth of the receiving port.
Enables ingress (pir), cir and egress limits
on the port(s).
Enables limits for incoming traffic on the
ingress
port(s).
Sets the maximum bandwidth allowed for
ingress
incoming traffic on the port(s).
<Kbps>
Enables bandwidth limits allowed for
egress
outgoing traffic on the port(s).
Sets the maximum bandwidth allowed for
egress <Kbps>
outgoing traffic on the port(s).
Enables broadcast storm limits on the
switch.
Specifies the maximum amount of
<Kbps>
bandwidth allowed for broadcast traffic.
Enables DiffServ on the port(s).
Sets the quality of service priority for an
<0 .. 7>
interface.
Enables port mirroring in the interface.
Enables port mirroring for incoming,
dir
outgoing or both incoming and outgoing
<ingress|egre
traffic.
ss|both>
Port mirroring copies traffic from one or all
ports to another or all ports for external
analysis.
ES-2108 Series User's Guide
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
207