No Trunk; No Port-Access-Authenticator - ZyXEL Communications Dimension ES-2108 User Manual

ES-2108 Series User's Guide

32.4.4.1 no trunk

Syntax:
no trunk <T1|T2>
no trunk <T1|T2> lacp
no trunk <T1|T2> interface <port-list>
where
<T1|T2>
<T1|T2> lacp
<T1|T2> interface
<port-list>
An example is shown next.
• Disable trunk one (T1).
• Disable LAPC on trunk two (T2).
• Remove ports one, three, four and five from trunk two (T2).
sysname(config)# no trunk T1
sysname(config)# no trunk T2 lacp
sysname(config)# no trunk T2 interface 1,3-5

32.4.4.2 no port-access-authenticator

Syntax:
no port-access-authenticator
no port-access-authenticator <port-list> reauthenticate
no port-access-authenticator <port-list>
where
<port-list>
reauthenticate
<port-list>
An example is shown next.
• Disable authentication on the switch.
• Disable re-authentication on ports one, three, four and five.
• Disable authentication on ports one, six and seven.
224
= Disables the trunk group.
= Disables LACP in the trunk group.
= Removes ports from the trunk group.
= Disables port authentication on the switch.
= Disables the re-authentication mechanism on the listed port(s).
= Disables authentication on the listed ports.
Chapter 32 Configuration Mode Commands