Figure 45 Static Mac Forwarding; Table 20 Static Mac Forwarding - ZyXEL Communications Dimension ES-2108 User Manual

ES-2108 Series User's Guide

Figure 45 Static MAC Forwarding

The following table describes the labels in this screen.

Table 20 Static MAC Forwarding

LABEL
Active
Name
MAC Address
VID
Port
Add
Cancel
Clear
Index
Active
Name
MAC Address
VID
Port
96
DESCRIPTION
Select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by clearing this check box.
Enter a descriptive name for identification purposes for this static MAC address
forwarding rule.
Enter the MAC address in valid MAC address format, that is, six hexadecimal
character pairs.
Note: Static MAC addresses do not age out.
Enter the VLAN identification number.
Type the port number where the MAC address entered in the previous field will be
automatically forwarded.
After you set the fields above, click Add to insert a new rule.
Clicking Add saves your changes to the switch's run-time memory. The switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.
Click Cancel to reset the fields.
Click Clear to begin configuring this screen afresh.
Click an index number to modify a static MAC address rule for a port.
This field displays whether this static MAC address forwarding rule is active (Yes) or
not (No). You may temporarily deactivate a rule without deleting it.
This field displays the descriptive name for identification purposes for this static MAC
address-forwarding rule.
This field displays the MAC address that will be forwarded and the VLAN identification
number to which the MAC address belongs.
This field displays the VLAN identification number.
This field displays the port where the MAC address shown in the next field will be
forwarded.
Chapter 9 Static MAC Forwarding