Switch Setup Screen; Figure 33 Switch Setup; Table 11 Switch Setup - ZyXEL Communications Dimension ES-2108 User Manual

ES-2108 Series User's Guide
Note: VLAN is unidirectional; it only governs outgoing traffic.
See Chapter 8 on page 83

7.5 Switch Setup Screen

Click Basic Setting and then Switch Setup in the navigation panel to display the screen as
shown. The VLAN setup screens change depending on whether you choose 802.1Q or Port
Based in the VLAN Type field in this screen. Refer to the chapter on VLAN.

Figure 33 Switch Setup

The following table describes the labels in this screen.

Table 11 Switch Setup

LABEL
VLAN Type
MAC Address
Learning
Aging Time
GARP Timer:
Switches join VLANs by making a declaration. A declaration is made by issuing a Join message using
GARP. Declarations are withdrawn by issuing a Leave message. A Leave All message terminates all
registrations. GARP timers set declaration timeout values. See the chapter on VLAN setup for more
background information.
76
for information on port-based and 802.1Q tagged VLANs.
DESCRIPTION
Choose 802.1Q or Port Based. The VLAN Setup screen changes depending on
whether you choose 802.1Q VLAN type or Port Based VLAN type in this screen.
See Chapter 8 on page 83
MAC address learning reduces outgoing traffic broadcasts. For MAC address
learning to occur on a port, the port must be active.
Enter a time from 10 to 3000 seconds. This is how long all dynamically learned MAC
addresses remain in the MAC address table before they age out (and must be
relearned).
for more information.
Chapter 7 Basic Setting