Chapter 10 Filtering; Configure A Filtering Rule; Figure 46 Filtering; Table 21 Filtering - ZyXEL Communications Dimension ES-2108 User Manual

This chapter discusses MAC address port filtering.

10.1 Configure a Filtering Rule

Filtering means sifting traffic going through the switch based on the source MAC addresses
and VLAN group (ID).
Click Advanced Application and Filtering in the navigation panel to display the screen as
shown next.

Figure 46 Filtering

The following table describes the related labels in this screen.

Table 21 FIltering

LABEL
Active
Name
MAC
VID

Chapter 10 Filtering

DESCRIPTION
Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification purpose only.
Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs. Packets from this MAC address which also match the VLAN identification number
you enter in the VID field are dropped by the switch.
Type the VLAN group identification number. Packets which match the VLAN
identification number and the MAC address you enter in the MAC field are dropped by
the switch.
ES-2108 Series User's Guide
C
H A P T E R
1 0
Filtering
99