Enabling Trunking; Enabling Port Authentication; Radius Server Settings - ZyXEL Communications Dimension ES-2108 User Manual

ES-2108 Series User's Guide

32.8 Enabling Trunking

To create and enable a trunk, enter
press [ENTER]
Syntax:
trunk <T1|T2>
trunk <T1|T2> interface <port-list>
trunk <T1|T2> lacp
where
<T1|T2>
<T1|T2> interface <port-
list>
<T1|T2> lacp
An example is shown next.
• Create trunk 1 on the switch.
• Place ports 5-8 in trunk 1.
• Enable dynamic link aggregation (LACP) on trunk 1.
sysname(config)# trunk t1
sysname(config)# trunk t1 interface 5-8
sysname(config)# trunk t1 lacp

32.9 Enabling Port Authentication

To enable a port authentication, you need to specify your RADIUS server details and select the
ports which require external authentication. You can set up multiple RADIUS servers and
specify how the switch will process authentication requests.

32.9.1 RADIUS Server Settings

Configuring multiple RADIUS servers is only available via the command interpreter mode.
Use the
radius-server
Syntax:
radius-server host <index> <ip>
radius-server host <index> <ip> [acct-port <socket-number>] [key <key-
string>]
radius-server timeout <1-1000>
radius-server mode <priority|round-robin>
228
trunk
.
= Enables the trunk.
= Places ports in the trunk.
= Enables LACP in the trunk.
command to set up your RADIUS server settings.
followed by the ports which you want to group and
Chapter 32 Configuration Mode Commands