Clustering Management Configuration; Figure 102 Example: Uploading Firmware To A Cluster Member Switch; Table 66 Ftp Upload To Cluster Member Example - ZyXEL Communications Dimension ES-2108 User Manual

ES-2108 Series User's Guide

Figure 102 Example: Uploading Firmware to a Cluster Member Switch

C:\>ftp 192.168.1.1
Connected to 192.168.1.1.
220 FTP version 1.0 ready at Thu Jan
User (192.168.1.1:(none)): admin
331 Enter PASS command
Password:
230 Logged in
ftp> ls
200 Port command okay
150 Opening data connection for LIST
--w--w--w- 1 owner
-rw-rw-rw- 1 owner
--w--w--w- 1 owner
-rw-rw-rw- 1 owner
226 File sent OK
ftp: 463 bytes received in 0.00Seconds 463000.00Kbytes/sec.
ftp> bin
200 Type I OK
ftp> put 350du1.bin fw-00-a0-c5-d4-88-bf
200 Port command okay
150 Opening data connection for STOR fw-00-a0-c5-d4-88-bf
226 File received OK
ftp: 262144 bytes sent in 0.63Seconds 415.44Kbytes/sec.
ftp>
The following table explains some of the FTP parameters.

Table 66 FTP Upload to Cluster Member Example

FTP PARAMETER
User
Password
ls
350du1.bin
fw-00-a0-c5-d4-88-bf
config-00-a0-c5-d4-88-bf This is the cluster member switch's configuration file name as seen

26.3 Clustering Management Configuration

Click Configuration from the Cluster Management screen to display the next screen. Use
this screen to configure cluster management.
174
1 00:47:52 1970
group 3209434 Jul 01 12:00 ras
group 393216 Jul 01 12:00 config
group
group
DESCRIPTION
Enter "admin".
The web configurator password default is 1234.
Enter this command to list the name of cluster member switch's
firmware and configuration file.
This is the name of the firmware file you want to upload to the
cluster member switch.
This is the cluster member switch's firmware name as seen in the
cluster manager switch.
in the cluster manager switch.
0 Jul 01 12:00 fw-00-a0-c5-d4-88-bf
0 Jul 01 12:00 config-00-a0-c5-d4-88-bf
Chapter 26 Cluster Management