25.1.4 IGMP Snooping and VLANs
The Switch can perform IGMP snooping on up to 16 VLANs. You can configure the Switch to
automatically learn multicast group membership of any VLANs. The Switch then performs IGMP
snooping on the first 16 VLANs that send IGMP packets. This is referred to as auto mode.
Alternatively, you can specify the VLANs that IGMP snooping should be performed on. This is
referred to as fixed mode. In fixed mode the Switch does not learn multicast group membership of
any VLANs other than those explicitly added as an IGMP snooping VLAN.
25.2 Multicast Status
Click Advanced Application > Multicast to display the screen as shown. This screen shows the
multicast group information. See
Figure 104 Advanced Application > Multicast
The following table describes the labels in this screen.
Table 72 Advanced Application > Multicast
LABEL
Index
VID
Port
Multicast Group
25.2.1 Multicast Setting
Click the Multicast Setting link in the Advanced Application > Multicast screen to display the
screen as shown. See
Chapter 25 Multicast
Section 25.1 on page 189
DESCRIPTION
This is the index number of the entry.
This field displays the multicast VLAN ID.
This field displays the port number that belongs to the multicast group.
This field displays IP multicast group addresses.
Section 25.1 on page 189
MES3500 Series User's Guide
190
for more information on multicasting.
for more information on multicasting.