Philips PerfectCare PSG9030/20R1 User Manual page 6

ENGLISH
8
Ironing with intelligent automatic steam mode
12
13
Ironing in manual mode
14
15
Your appliance comes with intelligent automatic steam thanks to DynamiQ
sensor technology which recognizes how and when your iron is moving. When
you turn on your appliance, this mode will be activated by default (Fig. 12).
Coupled with ActiveSense technology, your iron will steam automatically the
right amount of steam based on your movements and the fabric type without
the need to use the steam trigger.
In intelligent automatic steam mode, steam comes out automatically when you
move the iron and stops when you stop moving the iron (Fig. 13). You can still
press the steam trigger in this mode to activate the steam when the iron is not
moving.
Note: For your safety, in intelligent automatic steam mode, the steam stops
when the iron is lifted up.
Ensure that the board is fitting to the size and weight of steam generator.
You can control the amount of steam manually during ironing by turning off the
intelligent automatic steam mode .
- To exit the intelligent automatic steam mode, press the intelligent
automatic steam button (Fig. 14). The intelligent automatic steam light
turns off. You need to press the steam trigger to continue your ironing.
- In manual mode, ActiveSense technology will still adjust the temperature
and steam amount automatically to different fabrics, but you need to press
the steam trigger to activate steam release.
Warning: Never direct steam at people.
Note: For best result on tough fabrics such as cotton, linen and denim, keep
the steam trigger pressed continuously when you move the iron over the
fabric (Fig. 15). Then move the iron over the same area a few more times
without steam to dry the fabric.
Note: For the best results on silk and shiny synthetic fabrics, it is
recommended to keep the steam trigger pressed continuously while
ironing.