Philips PerfectCare PSG9030/20R1 User Manual page 12

ENGLISH
14
Problem Possible cause
The appliance does There is not enough water in the
not produce any water tank (the 'low water alert'
steam. light flashes).
The appliance is not hot enough
to produce steam.
The automatic steam mode is off
and you did not press the steam
trigger.
The water tank is not placed in
the appliance properly.
The appliance is not switched on.
The Easy De-calc light is on.
The appliance has The auto-off function is activated
switched off. The automatically when the appliance
light in the on/off has not been used for more than
button flashes. 4-5 minutes.
The appliance has There is poor contact of power
switched off. plug to socket.
The 'iron ready' light The 'iron ready' light will be in
changes between blue to indicate that the iron is
blue and white in the optimal state for certain
during my ironing fabrics like silk, polyester. When
session. the 'iron ready' light turns white,
the iron is providing higher
temperature/steam for other
types of fabrics, for example,
cotton, linen, denim.
Solution
Fill the water tank (see chapter 'Using your
appliance', section 'Getting the product
ready').
Wait until the 'iron ready' light on the iron
lights up continuously.
Press the steam trigger and keep it pressed
while you iron or ensure that the automatic
steam mode is on.
Slide the water tank back into the appliance
firmly ('click').
Insert the plug in the wall socket and
press the on/off button to switch on the
appliance.
Descale the appliance (see chapter
'IMPORTANT - EASY DE-CALC').
Press the power on/off button to switch on
the appliance again.
This is a high power product. Ensure that
the plug is properly plugged to the wall
socket. It is not recommended to use
extension cord or adapter.
This is normal. With the ActiveSense
technology, the 'iron ready' light
automatically turns blue or white to
indicate the temperature/steam state of
the iron.