Start-Up; Safety; How To Install - Fronius TimeTwin Digital Operating Instructions Manual

Start-up

Safety

Danger from an electrical shock.
If a power source is plugged into the mains electricity supply during installation,
there is a high risk of very serious injury and damage.
▶
▶
▶

How to install

The mode of installation for a TimeTwin Digital welding installation will depend
upon several factors, e.g.:
-
-
-
-
-
-
-
The following description refers to a specimen configuration. For detailed infor-
mation on each of the operations involved, please see the documentation that
comes with the individual components.
Steps involved in installation, shown with reference to a specimen configuration
1
2
96
WARNING!
Before putting the machine into service, read the section headed "Safety ru-
les" in the power source Operating Instructions.
Only carry out these preparations if the mains switches of both power
sources are in the "0" position and
Only carry out these preparations if both mains cables are unplugged from
the mains.
what application is intended
what metal is to be welded
how the welding wire is supplied (wire spool, bulk wire container)
space considerations
influences from the robot and robot control and/or from other automation
devices
accessibility
ambient conditions
6. 7.
14.
4.
3.
2.
Mark all "double" units (power sources, wirefeeders, unreeling-type wirefee-
ders, etc.) with adhesive labels reading "1" and "2", as the case may be. Do
the same for all "double" accessories (interconnecting cables, connector
leads, wirefeeder hoses etc.).
Mount the base stands
10.
11.
9.
1.
5.
8.
12.
13.