Every Start-Up; Every Time The Wirespool Is Changed; Disposal - Fronius Robacta Single Pipe Operating Instructions Manual

Every start-up

-
-
-
-
-
-
Every time the -
wirespool is -
changed -

Disposal

Waste electrical and electronic equipment must be collected separately and re-
cycled in an environmentally-friendly way, in accordance with the European Di-
rective and national legislation. Used equipment must be returned to the distri-
butor or disposed of via an approved local collection and disposal facility. Cor-
rect disposal of used equipment promotes the sustainable recycling of material
resources. Failing to dispose of used equipment correctly can lead to adverse he-
alth and/or environmental impacts.
Packaging materials
Separate collection according to material. Check your local authority regulations.
Crush containers to reduce size.
32
Check contact tube and replace it if it is worn out
Remove welding spatter from gas nozzle
If there is dirt that cannot be removed from around the clamping area, re-
place the gas nozzle
Remove welding spatter from nozzle fitting
On water-cooled welding torches: Check the water connections for leaks
Monitor the water return level in the coolant container and bleed the cooling
unit if necessary.
Replace inner liner (recommended)
Clean wirefeeding hose with reduced compressed air
Clean wearing parts before fitting