Furuno TZT2BB Installation Manual page 49

[PROPULSION ENGINE] or [OTHER ENGINE] menu
Menu Item
[Max. RPM]
[Red Zone Oil Pressure]
Max. Oil Pressure
Min. Temperature
[Red Zone Temperature]
Menu item
[Add Default CZone
Pages]
[CZone DIP Switch
Settings]
Menu item
[Reset Instrument Pag-
es]
[Reset Default Set-
tings]
[Initial Setup] menu - [Engine & Tank Automatic Setup]
The TZT2BB will automatically detect engines and tanks connected to the same net-
work. This is the recommended method for setting up engines and tanks.
Description
Set the maximum rpm of your engine to
show on the RPM display.
Set the starting value for the red zone area
of the oil pressure meter.
Set the maximum oil pressure of your
engine.
Set the minimum temperature for your
engine.
Set the starting value for the red zone area
of the engine temperature indicator.
CZone
Create, edit C-Zone pages.
Set this unit's DIP switches. For the serviceman. Do not change the set-
tings.
Reset instrument pages, default settings
Resets all instrument pages to default.
Resets applicable settings to default.
3. EQUIPMENT SETUP
Options (setting range)
1 (rpm) to 20,000 (rpm)
0 (psi) to 143 (psi)
1 (psi) to 144 (psi)
0.00°C to 99.00°C
0.01°C to 999.00°C
Description
Description
[OK], [Cancel]
[OK], [Cancel]
3-11