Furuno TZT2BB Installation Manual page 62

3. EQUIPMENT SETUP
3.7.2 How to update or add charts
Free (USA and NOAA) and for-fee compatible charts are provided by FURUNO and
Mapmedia. Go to the URL shown below to download Mapmedia charts. For FURUNO-
supplied charts, contact your local FURUNO dealer.
Mapmedia chart data: http://www.mapmedia.com/charts-catalog.html
When you purchase a chart, you will also receive an email with the unlock codes and
an attached file: TL_UCPOOL.zuc (automatic chart unlock file).
Download the chart file to your desktop. Unzip the file, then copy it to the root of a mi-
croSD card. Insert the card into the SD card slot on the display unit. For the detailed
procedure, refer to the instructions on the FURUNO website.
Note: Make sure to unzip the chart file before copying to microSD. The system does
not recognize zip files.
A for-fee chart must be unlocked before use, using one of the following methods.
Manually input the unlock code
Go to the Home screen and tap [Charts] to show the [Charts Catalog] display. Tap [In-
sert Code] then enter the chart unlock code from the software keyboard.
Download the unlock code
Connect to the Internet (see "How to create a local wireless network" on page 3-22).
Go to the Home screen and tap [Charts] to show the [Charts Catalog] display. Tap
[Download Codes]. The popup message "CODES DOWNLOADED" appears when
the download is complete.
Automatic unlock file
1. Connect a USB flash memory to your PC, then copy the TL_UCPOOL.zuc (at-
tached to same email as the unlock codes) file to the root of the USB flash mem-
ory.
2. Turn off the power for the TZT2BB that needs charts unlocked.
3. Disconnect the USB flash memory from the PC, then connect the memory to the
USB1 port on your TZT2BB.
4. Turn on the TZT2BB. The unlock code is automatically applied.
5. Turn the power off, then remove the USB flash memory.
3-24