Furuno TZT2BB Installation Manual page 40

3. EQUIPMENT SETUP
How to operate the menus
The following procedure shows how to use the menu system.
1. Press
2. After the startup process completes, the last used display appears and a warning
message is displayed. After reading the message, tap [OK].
3. Tap the [FURUNO] icon (
settings.
4. Tap [Settings] to open the [Settings] menu.
5. Drag the menu to show [Initial Setup], then tap [Initial Setup].
Back icon
6. Depending on the menu item selected, the following operations are available:
• [ON]/[OFF] toggle switch.
Tap to switch between [ON] and [OFF]. [ON] activates the function, [OFF]
deactivates the function.
• Slidebar and keyboard icon.
Drag the slidebar to adjust the setting. Settings may also be adjusted using the
software keyboard for direct input.
• Keyboard icon.
Referring to the figure on the following page, use the software keyboard to input
alphabet or numeric characters.
7. Tap [Close] (Indicated as an "X") at the top right-hand side of the screen to exit.
3-2
(power switch) on the switch box to turn the power on.
Home menu
Menu title
Menu Menu
items items
) to show the home screen and display mode
Close icon
Preview screen Preview screen
Changes made in the Changes made in the
menu can be menu can be
previewed here previewed here