Download
Share
Print this page
Furuno TZT2BB Instructions Manual
  1. Manuals
  2. Brands
  3. Furuno Manuals
  4. Laboratory Equipment
  5. TZT2BB
  6. Instructions manual

Furuno TZT2BB Instructions Manual

Sales bulletin
Hide thumbs Also See for TZT2BB:

Advertisement

Quick Links

Download this manual
9-52 Ashihara-cho, Nisinomiya, 662-8580, Japan
www.furuno.co.jp
Sales Bulletin
Attention: All Furuno Distributors/Subsidiaries
SB No: FSB18-0003
Number of Pages: 28
Date: May 21, 2018
New Black Box
TZT2BB
Model:
1

Advertisement

loading

Related Manuals for Furuno TZT2BB

Summary of Contents for Furuno TZT2BB

  • Page 1 9-52 Ashihara-cho, Nisinomiya, 662-8580, Japan www.furuno.co.jp Sales Bulletin Attention: All Furuno Distributors/Subsidiaries SB No: FSB18-0003 Number of Pages: 28 Date: May 21, 2018 New Black Box TZT2BB Model:...
  • Page 2 Retrofitting from GD-1920C-BB (NavNet 3.2. Operating with MCU-005 vx2) to TZT2BB 3.3. What Can You Do with a Mouse/Trackball Other Notes with Wheel? Software Versions - TZTL12F/15F and TZT2BB About Monitors and Supporting Resolutions 4.1. Required Specifications of Multi Touch Monitors for TZT2BB...
  • Page 3 1.1. Powerful Dual Processors for Dual Monitors with Independent Resolutions The TZT2BB consists of dual processors in one box for powerful performance and the ability to support independent resolutions on dual monitors. In the TZT2BB configuration with dual monitors, each monitor shows independent images, and you can operate each monitor independently and simultaneously.

  • Page 4: Hdmi Input

    1.6. Easy Access to I/Os with Pigtail The TZT2BB has two (2) sets of pigtail cables to support a variety of input and output ports. Each cable is labeled with its signal type in order to easily plug into required ports. See Section 5.2...

  • Page 5: Specifications

    2. Specifications 2.1. Comprising Type Standard Comprising Processor unit MPU-004 (left), switch box PSD-003 (right), installation materials, spare parts, accessories, etc. IMD03460000 TZT2BB New Options Code Type Descriptions 00003509700 MCU-005 Control unit with full keyboard 00150690000 OP19-19 MCU-005 modification kit to convert the MCU-001 to MCU-005 (See Section 6.2)
  • Page 6 2.2. Specifications Model TZT2BB TZTL12F/15F TZTBB MFDBB General 1280×720 (HD) 1920×1080 (FHD) 1280×1024 (SXGA) TZTL12F (12.1”-wide): 1280×800 (WXGA) 1280×800 (WXGA) 1280×1024 (SVGA) 1024×768 (XGA) Resolution TZTL15F (15.6”-wide): 1366×768 (FWXGA) 1280×960 (Quad-VGA) 1024×768 (XGA) 800×600 (SVGA) 1280×1024 (SXGA) TZTL12F: 1300 cd/㎡...
  • Page 7 TZTL15F: 4.9 kg (5.5 kg with bracket) Note: (1) The built-in wireless LAN of TZT2BB, TZTL12F/15F, and TZTBB is approved for use in the US (FCC), Canada (IC), Europe (CE), Australia/New Zealand, and Japan only. For other areas, do NOT turn on the wireless LAN.

  • Page 8: Basic User Interface

    3.2. Operating with MCU-005 The MCU-005 is a new control unit for NavNet TZtouch2 MFDs. It consists of full keys that can operate the TZT2BB without using multi touch. The following illustration and table shows the keyboard component and available functions of the MCU-005 keyboard.
  • Page 9 The TZTL12F/15F will also be compatible with the MCU-005 from the version 6.01 or later software. 3.3. What Can You Do with a Mouse/Trackball with Wheel? When the TZT2BB is connected with a generic HID-mouse (USB mouse) or a trackball that has a wheel, each component works as follows.
  • Page 10 Accessible Screen with One (1) Mouse/Trackball Multiple USB ports are available on the TZT2BB. One (1) mouse/trackball can control one (1) screen only even when two (2) monitors are connected. You CANNOT access two (2) monitors with one trackball/mouse. (The MCU-004 and MCU-005 can access multiple screens in the network with the [Switch Disp.] key.)
  • Page 11 Limited Functions and Notes Although most operations are available only with a mouse/trackball and wheel, take the following limitations and notes. (1) Limitation in 3D Mode – Pan/Tilt You can turn the screen mode into the 3D mode by selecting [3D Mode] from the context.
  • Page 12 (4) No dedicated driver installation required for multi touch function The TZT2BB, as well as TZTL12F/15F, do not accept an external driver to be installed. No dedicated driver can be installed locally. When arranging a multi touch monitor, make sure to confirm that the multi touch interface is available without installing a dedicated driver.
  • Page 13 4.3. TZT2BB Supporting Resolutions The TZT2BB has the following native resolutions, supporting both wide and non-wide resolutions. Pixels Aspect Ratio 1920×1080 (FHD) Wide – 16:9 1280×1024 (SVGA) Non-Wide – 5:4 1024×768 (XGA) Non-Wide – 4:3 The TZTBB automatically selects either one of the resolutions above and outputs images to the monitor by scaling according to the monitor’s resolution.
  • Page 14 Native Wide Resolution Native Non-Wide Resolution 1920×1080 (16:9) 1280×1024 (5:4) Displayed on 24” wide monitor (1920 x 1080) Displayed on 19” monitor (1280 x 1024)
  • Page 15 5. Installing TZT2BB 5.1. Dimensions MPU-004 PSD-003 MCU-005 Same dimension as MCU-001...
  • Page 16 5.2. Interconnection The processor unit MPU-004 consists of connectors and pigtail cables for wiring. The switch box PSD-003 is fit with two (2) cables. Left – MPU-004 Right – PSD-003 Left – Connectors and pigtails Bottom Left – Pigtail 1 Bottom Right –...
  • Page 17 An HDMI splitter should be used to show clone images on dual monitors because the HDMI OUT1 and 2 ports output independent images. Note on Networkable MFD Series: The TZT2BB can be networked with NavNet TZtouch/2 MFDs, NOT with NavNet 3D (MFD8/12/BB).
  • Page 18 6.01 or later in order to switch the controllable display with the [Switch Disp.] key on the MCU-004. The controllable display will NOT be switched from the TZT2BB to the TZTL12F/15F if the version is 5.03 or earlier.
  • Page 19 PoE Hub Requirement A PoE hub for the MCU-005 should be compatible with Alternative A (Type A). PoE stands for Power over Ethernet. In additon to data comunication, power is supplied through an Ethernet cable. Power feeding of PoE has two (2) types: Alternative A (Type A) or Alternative B (Type B). Alternative A (Type A): Alternative A is also described as Type A.
  • Page 20 HDMI output, external equipment with HDMI output or DVI/VGA (RGB) output converted to HDMI, TV, and DVD player can be input the the TZT2BB HDMI input port to show images on one of the screens. With a HDCP compatible monitor connected, the content with copyright protection such as movies can be shown.
  • Page 21 HDMI Input Specifications The TZT2BB HDMI input port is compatible with the following HDMI signals. Note that it is NOT compatible with interlace. Input Resolution Vertical Frequency Horizontal Frequency Pixcel Clock Frequency 1920×1080 60 Hz 67.5 kHz 148.5 MHz 1280×1024 60 Hz 64.0 kHz...
  • Page 22 6. Retrofitting from Previous NavNet Series Black Box The following table summarizes compatible and incompatible items and necessary actions when retrofitting from previous navNet series black boxes to the TZT2BB. Item From NavNet vx2: GD-1920C-BB to TZT2BB From NavNet 3D: MFDBB to TZT2BB...
  • Page 23 NMEA2000 interface. NMEA0183 Input NMEA0183 sensors to the TZT2BB network via an NMEA converter Input NMEA0183 sensors to the TZT2BB network via an NMEA converter or Input/output NMEA0183 sensors to/from the TZT2BB network Devices or replace them with NMEA2000 sensors.
  • Page 24 Previous – TZTBB Configuration NavNet TZtouch (TZT9/14/BB) and TZtouch2 (TZTL12F/15F and TZT2BB) can share the common sensor data through Ethernet and NMEA2000, and the quantity of analog camera ports (RCA) is the same. While utilizing the existing devices, note the following points in wiring.
  • Page 25 (2) Input NMEA0183 data to the NMEA2000 backbone via a converter such as the IF-NMEA2K2, or replace the NMEA0183 devices with NMEA2000 ones. (3) Ethernet sensors compatible with NavNet 3D work with NavNet TZtouch2. However, note one point on network with DRS series Radar: While the MFDBB has the DRS power port for the DRS2D/4D/4A/6A/12A, the TZT2BB has no power port.
  • Page 26 Conversion from MCU-001 to MCU-005 before Retrofitting to TZT2BB The conversion kit OP19-19 comes with a front cover, rubber key, slot hole cover, and an SD card for program update. Make sure that the MCU-001 is converted to MCU-005 before retrofitting to the TZT2BB.
  • Page 27 (7) If the monitor has the VGA (RGB) interface only, install a new monitor compatible with HDMI (or DVI-D for connection via DVI-HDMI adapter). (8) Make sure that these monitors are compatible with the resolution of 1920×1080 (FHD), 1280×1024 (SVGA), and 1024×768 (XGA), which are output from the TZT2BB.

  • Page 28: Other Notes

    Set the Wireless LAN menu such as entering SSID to an access point at the primary monitor. (2) With dual monitors connected to the TZT2BB processor unit, only one SD card for chart is fine to show charts on both monitors.