Table of Contents
Advertisement
ME Recovery Mode
Close Jumper JPME1 to select ME
Firmware Recovery mode, which will
limit resource allocation for essential
system operation only in order to
maintain normal power operation and
management. In the single operation
mode, online upgrade will be available
via Recovery mode. See the table on
the right for jumper settings.
ME Manufacture Mode
Jumper JPME2 allows the user to flash
the system firmware from a host server
to modify system settings. Close this
jumper to bypass SPI flash security
and force ME into the manufacture
mode. See the table on the right for
jumper settings.
5-10 Onboard Indicators
LAN LEDs
The Ethernet ports (located beside
the VGA port) have two LEDs. On
each Gigabit LAN port, the right LED
indicates activity when blinking while
the left LED may be green, amber or
off to indicate the speed of the connec-
tion. See the table on the right for the
functions associated with the activity
(connection speed) LED.
Note: For TLAN 1/2 LED indicators, please refer to JF2 and LEB7 on page 5-34.
Chapter 5: Advanced Serverboard Setup
ME Recovery Mode
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
ME Manufacture Mode
Jumper Settings
Jumper Setting
Pins 1-2
Pins 2-3
Link LED
Connection Speed Indicator
LED Color
Definition
Off
No Connection/10 Mbps/100 Mbps
Amber
1 Gb/s
Green
10 Gbps
5-27
Definition
Normal
ME Recovery
Definition
Normal
Manufacture Mode
Activity LED
LAN LED
Advertisement
Table of Contents
