Advantech PCIE-1751 User Manual page 22

After the PCIE-1751 card is installed, you can verify whether it is properly installed on
your system through the Device Manager:
1. Access the Device Manager through the Control Panel/System/Device Man-
ager.
2. The device name of the PCIE-1751 should be listed on the Device Manager tab
as follows.
Note!
If your card is properly installed, you should see the device name of your
card listed on the Device Manager tab. If you do see your device name
listed on it but marked with an exclamation sign "!", it means your card
has not been correctly installed. In this case, remove the card device
from the Device Manager by selecting its device name and press the
Remove button. Then go through the driver installation process again.
After your card is properly installed on your system, you can configure your device
using the Advantech Navigator after you install XNavi on your computer.
PCIE-1751 User Manual
Figure 2.1 Device Manager
14