Security
Overview
The termination unit provides several methods of security by limiting user access
to the ATI through option settings. You can:
T
T
T
See
ATI Access Levels
The unit has two access levels: Administrator and Operator. The access level
determines what functions are accessible, as shown in
Table 7-1.
Access level is also used to control access via Telnet. If the Telnet Session Access
Level is set to Administrator, a Login ID with an Operator access level is not
permitted access (see
Configuration Options ).).
The effective access level is the more restrictive of the session access level or the
login access level.
8774-A2-GB20-30
Enable the Telnet Login Required option.
Limit the access by setting a Session Access Level option of Operator for the
Telnet Session.
Disable the access with the Telnet Session option.
Table A-5, Telnet Session Options,
Access Levels
ATI Access to Menu Functions
Status
Test
Configuration
Control
Table A-5, Telnet Session Options,
February 2001
in Appendix A, Configuration Options .
Table 7-1, Access
Administrator
Operator
Read-Only
Read-Only
Full Access
No Access
Full Access
Read-Only
Full Access
No Access
in Appendix A,
7
Levels.
7-1