Function Keys - Paradyne Hotwire 8774 User Manual

The current setting or value appears to the right of the field name. You can enter
information into a selected field by:
T
T
If a field is blank and the Field Value Choices display valid selections, press the
spacebar; the first valid value for the field will appear in the field. Continue
pressing the spacebar to scroll through other valid values. Press Enter to select
the value.

Function Keys

All function keys located below the dotted line operate the same way (upper- or
lowercase) throughout the screens.
8774-A2-GB20-40
Typing in the first letter(s) of a field value or command.
Switching from the screen area to the function keys and message area below
the dotted line, and selecting a function key.
For the screen
function . . . Select . . . And press Enter to . . .
ClrFar F or f
ClrNear N or n
ClrStats S or s
Delete L or l
Exit E or e
MainMenu M or m
New N or n
PgDn D or d
PgUp U or u
ResetMon R or r
Save S or s
February 2001
2. Using the Asynchronous Terminal Interface
Clear far-end network statistics and refresh the screen.
Clear near-end network statistics and refresh the screen.
Clear DSX-1 statistics and refresh the screen.
Delete data.
Terminate the asynchronous terminal session.
Return to the Main Menu screen.
Enter new data.
Display the next page, or group of entries.
Display the previous page, or group of entries.
Reset an active Monitor 511 test counter to zero.
Save information.
2-7