Front Panel Leds - Paradyne Hotwire 8774 User Manual

Tdm sdsl termination unit with dsx-1 interface
Hide thumbs Also See for Hotwire 8774:
Table of Contents

Advertisement

4. Monitoring the Unit

Front Panel LEDs

The following table describes the meaning and states of the LEDs on the
faceplate.
* Slow Cycling: LED turns off and on in equal duration once per second.
TDM
SDSL
8774
00-16144-01
4-14
Type
LED
SYSTEM
OK
(Green)
Alrm
(Amber)
Test
(Amber)
DSX-1
1, 2, 3, 4
(Green)
DSL PORT
1, 2, 3, 4
(Green)
Fast Cycling: LED turns off and on in equal duration 5 times per second.
Pulsing: LED turns off momentarily once per second.
February 2001
LED is . . .*
Indicating . . .
On
Device failure; system processing has
stopped.
Off
No power is being delivered to the card.
Slow Cycling
Unit is in minimum mode and a download
is required.
Pulsing
Normal operation.
On
Device failure or the Power-On Self-Test
(POST) has failed.
Off
No alarms exist.
On
Loopback test or 511 test pattern is
in progress.
Slow cycling
POST is in progress.
Off
No tests are active.
On
Recoverable signal is present on the
DSX-1 interface.
Slow cycling
Yellow Alarm Indication (RAI) is present.
Fast cycling
An OOF, LOF, EER, or AIS condition
exists.
Off
No signal is detected on the interface.
On
DSL link is up.
Slow cycling
DSL training is in progress.
Fast cycling
OOF condition is present.
Off
DSL link is down.
8774-A2-GB20-40

Advertisement

Table of Contents
loading

Table of Contents