Current And Default Factory Configurations - Paradyne Hotwire 8774 User Manual

3. Initial Startup and Configuration
Make a selection by placing the cursor at your choice and pressing Enter.

Current and Default Factory Configurations

The Configuration Edit/Display screen appears when the current or default
configuration is loaded. To access the Configuration Edit/Display screen, follow
this menu selection sequence:
Load Default Factory Configuration to reset the unit's configuration to its original
factory-set configuration to restore access to the ATI when the unit has been
misconfigured.
In the menu selection sequences contained in this manual, Current Configuration
is assumed and shown.
3-4
If you select . . . Then . . .
Current The selected configuration option set is loaded and the
Configuration Configuration Edit/Display menu appears. This is the unit's
currently active configuration.
Configuration The Configuration Loader screen is displayed allowing you to
Loader upload or download configurations from a TFTP server.
Default Factory The factory-set configuration options are loaded and the
Configuration Configuration Edit/Display menu appears. This is a read-only
configuration area.
Main Menu Configuration
– or –
Main Menu Configuration
main/config/edit
Slot: 4
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Save
February 2001
Current Configuration
Default Factory Configuration
CONFIGURATION EDIT/DISPLAY
Network
DSX-1
Copy Ports
System Options
Management and Communication
Hotwire
Model: 8774
MainMenu Exit
8774-A2-GB20-40