Viewing Current Network Performance - Paradyne Hotwire 8774 User Manual

4. Monitoring the Unit

Viewing Current Network Performance

The Current Network Performance Statistics screen allows you to monitor selected
current network status and error information for both the near- and far-end units
from a single screen.
To view Current Network Performance for a port, follow this menu selection
sequence:
The following Network Performance Statistics are collected for the selected port:
T
T
T
The following Network Error Statistics are collected for the selected port:
T
T
T
4-10
Main Menu Status
main/status/performance/current
Slot: 4:
Port: 3 CURRENT NETWORK PERFORMANCE STATISTICS
Current Interval Timer: 002
-------------------------------------------------------------------------------
Near End
Margin +02
XmtPw +03
RxGn +02
ES 002
SES 002
FEBE 000
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
ClrNear
Select: 1, 2, 3, 4
Mrgn: Signal to Noise Ratio (SNR) Margin, the amount (in dB) that the
Receive signal has exceeded the value needed to maintain a Bit Error Rate
–7
(BER) of 10 or better.
XmtPw: The transmit power level.
RxGn: The receiver gain level.
ES (Errored Seconds): Seconds during which one or more ESF error events
occurred.
SES (Severely Errored Seconds): Seconds during which more than
320 cyclic redundancy check (CRC) error events or at least one Out of Frame
(OOF) event occurred.
FEBE (Far-End Block Errors): Errors reported by the remote equipment.
February 2001
Performance Statistics
Far End
+01
+03
+02
000
000
000
ClrFar
LOS at Net, Pt 1
Current Network Performance
Hotwire
Model: 8774
Payload Rate: 1536 kbps
DSL Line Rate: 1552 kbps
MainMenu Exit
8774-A2-GB20-40