Device Tests; Lamp Test - Paradyne Hotwire 8774 User Manual

5. Testing

Device Tests

The Device Tests menu lists a single, card-level test, the Lamp Test. To access the
Device Tests screen, follow this menu selection sequence:

Lamp Test

The Lamp Test determines whether all LEDs are lighting and functioning properly.
Procedure
To test the LEDs:
5-8
Main Menu Test Device Tests
main/test/card
Slot: 4
Test
--------------------------------------------------------------------------------
Lamp Test:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
1. Position the cursor at the Start command next to Lamp Test on the Device
Tests screen.
2. Press Enter.
The Start command is changed to Stop. During the Lamp Test, all LEDs blink
simultaneously every second. When you stop the Lamp Test, the LEDs are
restored to their normal condition.
3. To stop the Lamp Test, position the cursor at the Stop command.
4. Press Enter.
February 2001
DEVICE TESTS
Command Status
Start Inactive
Hotwire
Model: 8774
MainMenu Exit
8774-A2-GB20-40