Switching Between Screen Areas - Paradyne Hotwire 8774 User Manual

2. Using the Asynchronous Terminal Interface

Switching Between Screen Areas

Select Ctrl-a to switch between the two screen areas.
Procedure
To access the function keys and message area below the dotted line:
2-8
1. Press Ctrl-a to switch from the screen area to the function keys and message
area below the dotted line.
2. Enter the designated (underlined) character for the function key or press the
Tab key until you reach the desired function key.
Example:
To save the current options, type s or S (Save).
3. Press Enter. The function is performed.
4. To return to the screen area above the dotted line, press Ctrl-a again.
main/config/network
Slot: 4
Port: 3
Margin Threshold:
Excessive Error Rate Threshold:
AutoRate:
DSL Line Rate:
Circuit Identifier:
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
February 2001
NETWORK INTERFACE OPTIONS
–3db
1E–5
Disable
1552
Hotwire
Model: 8774
Clear
MainMenu Exit
8774-A2-GB20-40