IP Addressing
Selecting an IP Addressing Scheme
Your IP addressing scheme depends in part whether the MCC controlling the
chassis is running IP Conservative software.
Configurations Not Running IP Conservative Software
In a configuration not running IP Conservative software, the NTU's network
interface IP address is assigned through the peer IP address of the LTU's Network
Interface menu.
The termination unit is assigned an IP address and subnet through the DSLAM
Configuration
assigned, you can use the ATI to assign:
T
T
All Configurations
The NTU obtains its IP address when the PPP link is established over the EOC.
Use the ATI to assign:
T
T
8774-A2-GB20-40
DSL Cards
Peer IP addresses to the four DSL ports. These addresses are used as the IP
addresses of the remote units. See
Appendix A, Configuration Options .
An IP address for each NMS to act as a trap manager. See
Traps Options,
in Appendix A, Configuration Options .
An IP address for each NMS. See
Appendix A, Configuration Options .
An IP address for the TFTP server you wish to use to upload and download
configurations. See
Configuration Loader
Configuration , and the documentation for your TFTP server.
February 2001
Set IP Address menu. Once the address is
Table A-1, Network Interface Options,
Table A-7, SNMP NMS Security Options,
in Chapter 3, Initial Startup and
8
in
Table A-8, SNMP
in
8-1