Testing; Accessing The Test Menu - Paradyne Hotwire 8774 User Manual

Testing

Accessing the Test Menu

From the Test menu, you can run network tests, data port tests, a lamp test for the
front panel LEDs, or abort all tests.
To access the Test menu, follow this menu selection sequence:
8774-A2-GB20-40
Main Menu Test
main/test
Slot: 4
--------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu
Select . . . To . . .
Network & DSX-1 Tests Start and stop tests on the network or DSX-1 interface.
Device Tests Start and stop a lamp test.
Abort All Tests To abort all currently tests, excluding Network-initiated
loopback tests. An aborted test may continue to run for a few
seconds as the abort command is sent to the remote end and
processed.
February 2001
TEST
Network & DSX-1 Tests
Device Tests
Abort All Tests
5
Hotwire
Model: 8774
MainMenu Exit
5-1