Output Level In Each Structure; Structure - Roland S-220 Owner's Manual

d. Output Level in each Structure
The output level of each Structure can be individu-
ally controlled by MIDI Volume messages.
Also, by using the following procedure, the output
level can be individually set for each Structure on
the S-220,
PROCEDURE
@ Push the Level Button,
@ Push the Forward or the Backward Button until
the Display shows the Volume level of each
Structure.
Flashes
4
LEWLs:
MULTI
J0L
The output level of the Structure flashing in the
upper part of the Display can be edited.
Make another Structure flash
@© Continue to edit the output levels of the other
Structures by repeating steps @ and @ as
many times as required.
@© Push the Enter Key.
46
* When using the Multi function, the volume set
here has priority over the overall volume (Total
Volume=page 38).
* An Output level can be individually set for each
Structure only when the Multi function is in
use.