b. Control of the Output Level :
with Aftertouch
The volume can also be controlled by aftertouch
messages. The sensitivity of the effect can be set
as follows.
PROCEDURE
@ Push the Level Button, then push the Forward
or Backward
Button until the Display shows
"VOL. PRESS".
* When Channel Pressure (explained on page 90)
is set to OFF, Aftertouch messages are igno-
ted, therefore the volume cannot be controlled
by Aftertouch,
c. Balance
When the Separate function is not used (when the
Separate Button is not illuminated: see page 50),
exactly the same signal is sent to all the Output
Jacks, 1 to 4. Then, when receiving Balance mes-
sages from an external
MIDI device, the output
jacks 1 and 3 have different volumes from the
output jacks 2 and 4. When using Outputs 1 and 2
in stereo, you can control the positioning of the
sound with this function.
2
4
" MIDI Balance messages
R
'5
pan the sound.
@ Set the desired balance with the Alpha Dial.
39