Roland S-220 Owner's Manual page 7

Midi digital sampler
Hide thumbs Also See for S-220:
Table of Contents

Advertisement

= How to handle the Quick
Disk (QD)
;
The sampled sound on the S-220 can. be saved
onto a 2.8 inch double sided quick disk.
Protect Tab
Label Area
Magnetic Sheet
This is where the data is actually
stored.
Please do not touch the magne-
tic sheet.
Please do not touch the magnetic sheet, or the
disk may become damaged.
Do not fold or bend the disk.
When the disk is not to be used, preserve it
vertically in the supplied protective jacket. Do
not keep it on a slant or bent.
Keep the disk from extremely hot or cold tem-
peratures, dust or direct sunlight.
Do not expose the disk to strong magnetic
fields such as headphones or speakers.
Take out the protection sheet inserted in the
disk drive, by pushing
the Eject Button.
In
transit, reinsert the sheet into the drive.
Write
on an
adhesive
label
which you then attach here.
Writing on the disk can damage
it. Atleast, use a felt-tip pen and
apply very little pressure.
Please be sure to put the S-220 on a steady
and horizontal place.
Never remove or insert the disk, or switch the
S-220 on or off while the indicator of the disk
drive is lit, or the disk may be permanently da-
maged.
Please be sure that the label is securely att-
ached to the QD, or the label may come off in
the disk drive, making it difficult to take it out.
Please connect the QD securely to the disk
drive, When disconnecting the QD, push the
Eject Button until it clicks. If the QD has stuck
in the disk drive, do not try to remove it but
push the Eject Button, and it will come
out
without any trouble.

Advertisement

Table of Contents
loading

Table of Contents