Roland S-220 Owner's Manual page 86

[Cutting unnecessary portions (of
Structure AB, CD or ABCD)]
Using the Combining function, you can remove the
unnecessary portions: before the Start Point of
the first Bank and after the End Point of the sec-
ond Bank.
! Combine
Bank Bz
Bank B is empty.
The portions to be used after being combined are
between the Start Point and the End Point set
with the corresponding Wave Parameters.
That is, the combined data may be short enough
to be rewritten in one Bank(A). In this way, one of
the two Banks can be emptied ready to be used
for a new sample.
* The Start Point and the End Point selected with
Wave Parameter "Address Group" are valid.
86
© Select the Structure AB, CD or ABCD.
@ Push the Modify Button.
ambi rig
me EHMTER
@ Push the Enter Button. (Do not touch the Alpha @®
Dial.)
=