Adjusting The Output Level From The Aux Out Jacks - Roland CD-2 Owner's Manual

Adjusting the Output Level from the AUX OUT Jacks

Choosing the Audio Source that is Output
from the AUX OUT Jacks
Here's how to choose the audio source that will be output
from the CD-2's rear panel AUX OUT jacks.
1
Press until "AUX OUT Select" appears
in the display, and then press
• You can also select this item by turning [DATA].
The following screen appears.
2
Turn to select the audio source
that is output from the AUX
OUT jacks.
Mix: The audio of all sources is mixed and
output.
MIC: The audio from the MIC 1/MIC 2/GUITAR
jacks or the CD-2's internal mics is output.
LINE: The audio from the LINE IN jacks is output.
CD: The audio from the CD is output.
The audio from the CF card is output.
CF:
3
Press twice.
You're returned to the previous readout.
HINT
• If you want to record your performance on an
electronic piano together with your voice, make
connections as shown below so that the sound from
the mic will also be output from the speakers of the
electronic piano.
At this time, set AUX OUT to "MIC" to prevent a
feedback loop from occurring between the CD-2 and
the electronic piano.
Adjusting the Output Level of the AUX OUT
Jacks
Here's how to adjust the output level of the AUX OUT jacks.
1
Press
in the display, and then press
.
• You can also select this item by turning [DATA].
The following screen appears.
2
Turn
Fixed:
Variable: The [OUTPUT LEVEL] knob will adjust the
3
Press
You're returned to the previous readout.
Use the [OUTPUT LEVEL] knob to adjust the output
level of the AUX OUT jacks.
Mic
until "AUX OUT Level" appears
to select "Variable."
The output level is fixed.
The audio signal selected for "AUX OUT
Select" ( Page 77) is output at nominal
level.
output level.
twice.
Electronic piano
INPUT
OUTPUT
LINE IN
MIC 1 or MIC 2
.
AUX OUT
CD-2
77