Table of Contents
Advertisement
5. Swap
The contents (sampled sound and Wave Parame-
ters) of two different Banks (Structures) can be
swapped.
The
destination
Bank
(Structure)
is
limited, depending on the source Bank (Structure)
that you wish to swap as shown on page 78.
Take step ® on page 74, selecting one of the two
Banks (Structures) to be swapped.
Take steps @ and @, selecting "Swap".
= IB
ENTER
Now,
the data is swapped
between
the Bank
(Structure) shown
in the Display and the one
whose structure indicator is lit. When you wish to
change the Structure shown in the Display, use
the Alpha Dial.
error
"Hae d
The following error indication shows that you have
chosen Structure which cannot be swapped.
Select the appropriate Structure by pushing the
corresponding
Structure
Button
then the Enter
button. Then repeat the whole procedure,
(Take the above procedure for both Structures.)
Advertisement
Table of Contents
