Detune - Roland S-220 Owner's Manual

e. Detune
By playing one key, you can actually generate two
sounds in slightly different pitches.
PROCEDURE
@ Push the Structure Button which contains the
Bank you wish to use.
sede ok Heo oe de ee de
The Detune function involves five performance
parameters. -
@ Detune Range
In the Detune mode, the Detune Range value ap-
pears first by pushing the Performance Button.
PFMEDETUME MODE
—— Sound Name——~
® Push the F1 button.
@® Push the same Structure Button you pushed in
step @.
Detune Structure
4
5. STR back
Creu
* When using the Detune function, the S-220 is
eight voice polyphonic.
To turn the Detune function off, simply push any
of the Structure Button.
The pitch difference between the two sounds can
be determined by the value of the Detune Range
from 0 to 127, Higher values increase the pitch
difference.
© Detune Pressure Sens
PFRIDETUME MODE
SEMS = 16
This determines the sensitivity of the Detune ef-
fect which is controlled by Aftertouch messages,
from 0 to 127.
When the Channel Pressure switch (explained
on page 90) in the MIDI Function section is set
to OFF, Aftertouch message are ignored,
therefore the Detune effect cannot be con-
trolled by Aftertouch.
@ Detune Velocity Sens
PPR: DETUE
RAMGE