Roland S-220 Owner's Manual page 32

When the auto bend effect (explained on page 66)
is applied to a sound, one or both of the detuned
sounds can take on the auto bend effect.
Mode Display Description
Both BOTH Both voices take on
Auto Bend.
Half HALF | Either of voices
takes on Auto Bend
PFREDETUME MODE
BEHD BEST =HALF
One or both of the detuned sounds can take on
the pitch bend effect.
Mode Display Description
Both BOTH Both voices take on
Pitch Bend
Half HALF Either of voices
takes on Pitch Bend
* When the Pitch Bend switch (explained on
page 65) in the Wave Parameter section is
OFF, the sound would not take on the pitch
bend effect.
If the MIDI Bend (explained on page 89) in the
MIDI Function section is set to OFF, the MIDI
pitch bend messages are ignored, therefore,
the pitch bend effect cannot be obtained.
f. Delay
When a key is played, the direct sound will be
heard then the delayed sound.
© Push the Structure Button that contains the
sound you wish to take on the Delay effect.
— 'Sound Name——¥
@ Push the F2 button @.
@ Push the same Structure Button that you
pushed in step @.
Delay Structure
* When the Delay function is in use, the S-220 is
eight voice polyphonic.
To turn the Delay function off, simply push any of
the Structure Buttons.