Roland S-220 Owner's Manual page 87

Error
The following error indication shows . that the
Structure you have selected is not appropriate.
Coorik ine ste err
Sri
Select the appropriate Structure by pushing the
corresponding Structure Button then the Enter
Button. Then repeat the whole procedure.
(Take the above procedure for both Structures.)
The following error indication shows that the com-
bined data will be exactly the same as the original
voice. Please check the Start Point and the End
Point of the Wave Parameters.
need loa Cambri
& manuel
Effective use of Address Velocity Switch
When two Structures(voices) are combined in one
Bank, the Address Velocity Switch can be effect-
ively used so that either of the two sounds is play-
ed depending how hard you play the keyboard. A
wave parameter [Address Velocity Switch] and
two Address groups are involved.
As an example, set the Start and End points and
the Loop Length as follows.
Bank
This function is effective for percussive sounds.
* Wave parameters are common for the two
Address groups, therefore, they cannot be set
to different values.
87