Table of Contents
Advertisement
MIDI:
COMMOH
MHIDT
MOGbE=FoLy
This function selects MIDI Poly mode or MIDI Mo-
no mode,
MIDI Functions for Mono
Mode
@ Channel Range (the number of voices)
MODE
c
You can select the maximum number (1 to 8) of
voices played simultaneously in Mono mode.
Changing
"Channel
Range"
will
automatically
change the number of the voices to be used. For
instance, when the Basic channel is set to 1, se-
lecting 6 voices will automatically set the channels
1to6.
Also, when the Basic channel is set to 12, and the
number of voices is 8, channels from 12 to 16 are
used,. Any number higher than 17 will be ignored,
turning the unit to 5 voice polyphonic.
The number shown in [ ] is the number of voices
actually played.
* When the Mono mode command is transmitted
from an external MID! device, the S-220 will
automatically be set to Mono mode. (The Mono
Mode Indicator lights up.) Meanwhile the num-
ber
of
voices
simultaneously
sounded
is
recognized.
The
Mono
mode
command
of
Channel Range=0 means that the all the voices
are sounded.
© The MIDI Channel that can receive Control
Changes
EL
| MIDI:
MIDI Functions for Multi
Mo:
@ MIDI Channel setting for each Structure
Structures used in the Multi Function
MIDT:
CHtOFFSET
3=
4
When the Multi function is in use, a different MIDI
channel can be set for each Structure. (See page
44.)
* The default setting is 0,1,2 and 3 as the num-
ber to be added to the Basic channel.
91
Advertisement
Table of Contents
