Table of Contents
Advertisement
While the disk drive is running, the disk drive indi-
cator is lit. This is to warn you not to remove
or insert a disk. That would break the disk or
erase the data.
After a while, the Display will change as shown
below.
This shows that the sound saved on side A (BD)
of the disk has been loaded into the S-220. Also,
the indicator of the Structure Button A is lit. Now,
you can hear Bass Drum by sending MIDI Note
On messages.
@® Make sure that the disk drive indicator is dark,
push the Eject Button, remove
the QD and
reinsert it into the disk drive with side B (SD)
facing upward this time.
@® Likewise,
load the C (TOM)
and
the D (HH)
sides of the "Drum Set" disk.
Now, four different sounds are loaded into the
S-220's internal memory.
*
The key you play on the keyboard may sound in
a different
pitch.
This
is because
of the
Recording Key Number.
Advertisement
Table of Contents
