Table of Contents
Advertisement
2. Changing Looping
If you find the looping of the sample is strange or
the pitch of a loop is incorrect, edit the sample
with the wave parameters.
The picture will help you understand Looping.
End Point
Loop length
'Sampling Data
Le
Sampling
ao.
One second
Start
WEP SE
LoOOF
This selects whether to loop or not.
@ Loop Type
The length of the loop can be set with the "Loop
Length".
* When the loop length is too short, the loop may
get out of pitch. A pitch gap less than a semi-
tone can be later corrected by the Loop Tune
parameter (See page 59),
58
@ End Point
WERE:
EHL=
This is the end point of a loop.
*
Even when Loop OFF is selected, the End Point
can be set; any sound after the End Point is
muted.
The loop length and the end point are prepro-
grammed separately,
Address Display
Advertisement
Table of Contents
