Table of Contents
Advertisement
d.Control
of Balance
with
After-
touch
* When
Balance (explained on page 90) in the
MIDI Function section is set to OFF, balance
Balance
can
be controlled
by the
aftertouch
messages
are ignored, therefore, the balance
messages.
When
using the Outputs
1 and 2 in
of two sounds cannot be controlled with MIDI.
stereo, pushing the key harder after playing it in a
normal manner will pan the sound in the direction
set here.
Higher
Positioning of the sound field
Value of Balance
Value of Balance Pressure Sensitivity
Set the direction and sensitivity (the amount of
change) of the aftertouch as follows.
PROCEDURE
@® Push the Level Button, then push the Forward
or the Backward Button until the Display shows
"BAL. PRES.".
@
@® Push the Enter Button,
When Channel Pressure (explained on page 90)
in the MIDI Function section is set to OFF, af-
tertouch
messages
are
ignored,
therefore
aftertouch cannot control the balance.
40
Advertisement
Table of Contents
