Table of Contents
Advertisement
PRES
Ab
The S-220 allows you to program two different
sets of Start Point, Loop Length, End Point and
Loop Tune settings (Address Groups). You can se-
lect which address group is to be used.
Address Group 2
Address
group 2 can be programmed
in exactly
the same way as address group 1. However, Start
Point 2 cannot be set to any other value but zero,
or the value of the Start Point 1. (Usually, select
the value of the Start Point 1.)
When Start point 2 is set to the same value as the
Start point 1, changing start point 1 will automati-
cally change Start point 2.
TUNES
61
Advertisement
Table of Contents
