Table of Contents
Advertisement
15. Structure and Wave Parame-
ters
When
more
than
one
Bank
is combined
for
recording a sample, these Banks (e,g AB, CD,
ABCD) are considered to be one group, and one
group has a set of wave parameters.
When the Structure AB is separated into A and B,
each of A and B requires, and is given, the set of
parameters owned by the Structure AB. (The Loop
Type is One Shot and the Start Point is 0.)
Bank A.
Sample A
—
Wave Parameter A
On the other hand, when the two Structures A
and B are converted to one Structure AB, it will
have the set of parameters which used to belong
to Bank A. (Loop is OFF and the Start Point is 0.)
The parameters which belonged to Bank B will be
lost, therefore, the pitch of the sampled sound is
altered by Bank A's Recording Key Number and
Bank Tune. Bank A and B will be played sequen-
tially, but they will not be automatically set to the
same
pitch.
In other words,
unless
they are
recorded
in the same
pitch, the tuning
after
recording has on meaning.
Bank A
Sample A
mA
Sample 8
Wave Parameter A
Wave Parameter B
v
Bank A.
'Bank B
Sample A | Sample B
Wave Parameter A
Advertisement
Table of Contents
