Roland S-220 Owner's Manual page 22

The S-220 features various functions for con-
trolling performance, such as pitch bender, vibrato
and auto arpeggio.
The performance controlling functions can be
easily engaged by using the buttons on the panel.
Most of the performance controlling functions
consist of Performance Parameters. Performance
Parameters are loaded from a QD, and the effect
of the function can be altered by changing the va-
lue of each parameter as follows.
22
1. Editing Performance Para-
meters
To change the preprogrammed value of each par-
ameter, take the following procedure.
PROCEDURE
@ Push the Performance Button.
@® By using the Forward Button and the Backward
Button, call the performance parameter you
wish to edit with the aid of the Display win-
dow.
® By rotating the Alpha Dial, change the value of
the parameter.
PFE WIBRATO
RATE = 65a
The number shown at the right of the Display will
change as below.
e e e e n a ad (Oe oS Se >
Original Value
Pushing the Maximum Button sets the highest va-
lue, and pushing the Minimum Button sets the
lowest value.
To return to the original value before being edited,
push the Cancel Button.
If you wish, to edit other parameters, repeat the
steps @ and @®. -
@ Push the Enter Button.