Displaying/Editing Configuration Options - Paradyne 3350 User Manual

ACCULINK 3350 E1 NTU
The configuration options are divided into functional
groups. Appendix C contains a list of the configuration
options and defaults. These groups are:
DTE (G.703) Interface
Network Interface
User Interface
Alarm
General SNMP
SNMP Trap
Use the Configuration (Cnfig) branch of the front panel
menu tree to display or change E1 NTU configuration
options (see Appendix A, Front Panel Menu).

Displaying/Editing Configuration Options

To display/edit configuration options,
1. From the top-level menu screen, select Cnfig.
E1 HDSL NTU
Stat
F1
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.
Load from:
Activ
F1
3-10
Test Cnfig
F2 F3
Cust1
F3
F2
June 1996
3. Select Edit.
Choose Funct:
Edit Save
F1 F2
4. From the Edit screen, select the functional group
you want to edit by pressing the appropriate
Function key. Use the scroll keys, if necessary.
(The NET selection is shown as an example only.)
Edit:
DTE NET
F1 F2
The configuration options for the selected
functional group appear on the front panel one
option at a time. The option name appears on
Line 1 with the current value next to it. To reach
other options, use the Next and Previous selections
to scroll forward and backward through the group
of options.
HDSL Mode:NTU
Next NTU
F1 F2
5. Press the appropriate Function key to choose
another value. Use the scroll keys, if necessary.
6. Use the Save procedure to save your changes to
the Active or Customer area.
F3
Gen
F3
LTU
F3
3350-A2-GB20-10