Paradyne 3350 User Manual page 36

8. Press F2 (Edit) to edit the community name. The
factory default community name is public.
CommunityName1:
Next
F1
NOTE
Steps 9 and 10 describe the
process for entering text strings
for SNMP configuration options.
This process applies to entering
any text strings into SNMP
configuration options.
9. Use the and
under the character you want to change. Press
F1 (Up) or F2 (Down) to scroll through the valid
numbers/characters for the text string.
public
Up
F1
The F1 (Up) key scrolls through the ASCII
character set in the following order: numbers
(0 –9), lowercase letters (a–z), uppercase letters
(A–Z), space character, ASCII symbols (ascending
order, based on ASCII code), and the End of Line
symbol ( ). The
right of the cursor.
3350-A2-GB20-10
Edit Clear
F2 F3
keys to position the cursor
Down Save
F2 F3
erases all characters to the
June 1996
10. When you are through changing the community
name, you must press F3 (Save) to save the value.
Otherwise, the original value will be retained.
11. Press F1 (Next) until the Access 1 configuration
option appears.
12. Press F2 (Read) or F3 (R/W).
Access 1:
Next Read
F1 F2
The Read selection allows read-only access
(SNMP "Get") to the accessible objects in the
MIB when community name 1 is used. The R/W
selection allows Read/Write access (SNMP "Get"
and "Set") to the objects in the MIB. Write access
is allowed for all objects specified as read/write in
the MIB. Read access is allowed for all objects
specified as read-only or read/write.
Operation
R/W
F3
3-15